Vintage Snare Wire for Chrome Plated

snare drum is the most important component in the drum set, and the snare-wire is a crucial component of your drum’s sound. This fact has not been widely recognized until very recently; only a few drummers understand this important connection.

1n 1960, Ludwig and Slingerland manufactured what has now become the standard for good vintage wires. Several manufacturers have tried to re-produce the sound. After years of research, we have replicated the Slingerland wire taking several factors into account such as material, spiral diameter and pitch. We finally decided on a core thickness of 0.5 mm, a spiral diameter of 1.35mm and a pitch of 3.4 mm.
In that process, we also found that the end plate is another determinant of a snare-wire’s sensitivity, and we have tried various sizes for these as well. We concluded that 0.5mm is optimal to hold the wires. We also decided to exclude the guiding grooves for snare strings and tapes that most manufacturers use. These guiding grooves impaired the sensitivity of the snare drum. Our end plate is quite thin however; it may have caused breakage of strings and tapes. We resolved the problem by having the lapel at the holes on the end plate.

After years of careful analysis of the material composition, thickness of the end plate, shaping experiments and production consideration, we have the CANOPUS Vintage Snare Wire.
Super Jazz drummer Bill Stewart once visited us. He was so impressed by our proto-type Vintage Snare Wires he asked us if he could use it. Many CANOPUS endorsers appreciate the sound quality of this snare wire.

2 type for your choice,DR and NP
DR : Without plating – dry and crisp sound
NP : Chrome Plating – reduced unwanted high pitch overtone,yet rich and mild sound
(ZL : for Zelkova snare drum)